"""Implementation of JSONDecoder
"""
import re
import sys
import struct
from simplejson.scanner import make_scanner
def _import_c_scanstring():
try:
from simplejson._speedups import scanstring
return scanstring
except ImportError:
return None
c_scanstring = _import_c_scanstring()
__all__ = ['JSONDecoder']
FLAGS = re.VERBOSE | re.MULTILINE | re.DOTALL
def _floatconstants():
_BYTES = '7FF80000000000007FF0000000000000'.decode('hex')
# The struct module in Python 2.4 would get frexp() out of range here
# when an endian is specified in the format string. Fixed in Python 2.5+
if sys.byteorder != 'big':
_BYTES = _BYTES[:8][::-1] + _BYTES[8:][::-1]
nan, inf = struct.unpack('dd', _BYTES)
return nan, inf, -inf
NaN, PosInf, NegInf = _floatconstants()
class JSONDecodeError(ValueError):
"""Subclass of ValueError with the following additional properties:
msg: The unformatted error message
doc: The JSON document being parsed
pos: The start index of doc where parsing failed
end: The end index of doc where parsing failed (may be None)
lineno: The line corresponding to pos
colno: The column corresponding to pos
endlineno: The line corresponding to end (may be None)
endcolno: The column corresponding to end (may be None)
"""
def __init__(self, msg, doc, pos, end=None):
ValueError.__init__(self, errmsg(msg, doc, pos, end=end))
self.msg = msg
self.doc = doc
self.pos = pos
self.end = end
self.lineno, self.colno = linecol(doc, pos)
if end is not None:
self.endlineno, self.endcolno = linecol(doc, pos)
else:
self.endlineno, self.endcolno = None, None
def linecol(doc, pos):
lineno = doc.count('\n', 0, pos) + 1
if lineno == 1:
colno = pos
else:
colno = pos - doc.rindex('\n', 0, pos)
return lineno, colno
def errmsg(msg, doc, pos, end=None):
# Note that this function is called from _speedups
lineno, colno = linecol(doc, pos)
if end is None:
#fmt = '{0}: line {1} column {2} (char {3})'
#return fmt.format(msg, lineno, colno, pos)
fmt = '%s: line %d column %d (char %d)'
return fmt % (msg, lineno, colno, pos)
endlineno, endcolno = linecol(doc, end)
#fmt = '{0}: line {1} column {2} - line {3} column {4} (char {5} - {6})'
#return fmt.format(msg, lineno, colno, endlineno, endcolno, pos, end)
fmt = '%s: line %d column %d - line %d column %d (char %d - %d)'
return fmt % (msg, lineno, colno, endlineno, endcolno, pos, end)
_CONSTANTS = {
'-Infinity': NegInf,
'Infinity': PosInf,
'NaN': NaN,
}
STRINGCHUNK = re.compile(r'(.*?)(["\\\x00-\x1f])', FLAGS)
BACKSLASH = {
'"': u'"', '\\': u'\\', '/': u'/',
'b': u'\b', 'f': u'\f', 'n': u'\n', 'r': u'\r', 't': u'\t',
}
DEFAULT_ENCODING = "utf-8"
def py_scanstring(s, end, encoding=None, strict=True,
_b=BACKSLASH, _m=STRINGCHUNK.match):
"""Scan the string s for a JSON string. End is the index of the
character in s after the quote that started the JSON string.
Unescapes all valid JSON string escape sequences and raises ValueError
on attempt to decode an invalid string. If strict is False then literal
control characters are allowed in the string.
Returns a tuple of the decoded string and the index of the character in s
after the end quote."""
if encoding is None:
encoding = DEFAULT_ENCODING
chunks = []
_append = chunks.append
begin = end - 1
while 1:
chunk = _m(s, end)
if chunk is None:
raise JSONDecodeError(
"Unterminated string starting at", s, begin)
end = chunk.end()
content, terminator = chunk.groups()
# Content is contains zero or more unescaped string characters
if content:
if not isinstance(content, unicode):
content = unicode(content, encoding)
_append(content)
# Terminator is the end of string, a literal control character,
# or a backslash denoting that an escape sequence follows
if terminator == '"':
break
elif terminator != '\\':
if strict:
msg = "Invalid control character %r at" % (terminator,)
#msg = "Invalid control character {0!r} at".format(terminator)
raise JSONDecodeError(msg, s, end)
else:
_append(terminator)
continue
try:
esc = s[end]
except IndexError:
raise JSONDecodeError(
"Unterminated string starting at", s, begin)
# If not a unicode escape sequence, must be in the lookup table
if esc != 'u':
try:
char = _b[esc]
except KeyError:
msg = "Invalid \\escape: " + repr(esc)
raise JSONDecodeError(msg, s, end)
end += 1
else:
# Unicode escape sequence
esc = s[end + 1:end + 5]
next_end = end + 5
if len(esc) != 4:
msg = "Invalid \\uXXXX escape"
raise JSONDecodeError(msg, s, end)
uni = int(esc, 16)
# Check for surrogate pair on UCS-4 systems
if 0xd800 <= uni <= 0xdbff and sys.maxunicode > 65535:
msg = "Invalid \\uXXXX\\uXXXX surrogate pair"
if not s[end + 5:end + 7] == '\\u':
raise JSONDecodeError(msg, s, end)
esc2 = s[end + 7:end + 11]
if len(esc2) != 4:
raise JSONDecodeError(msg, s, end)
uni2 = int(esc2, 16)
uni = 0x10000 + (((uni - 0xd800) << 10) | (uni2 - 0xdc00))
next_end += 6
char = unichr(uni)
end = next_end
# Append the unescaped character
_append(char)
return u''.join(chunks), end
# Use speedup if available
scanstring = c_scanstring or py_scanstring
WHITESPACE = re.compile(r'[ \t\n\r]*', FLAGS)
WHITESPACE_STR = ' \t\n\r'
def JSONObject((s, end), encoding, strict, scan_once, object_hook,
object_pairs_hook, memo=None,
_w=WHITESPACE.match, _ws=WHITESPACE_STR):
# Backwards compatibility
if memo is None:
memo = {}
memo_get = memo.setdefault
pairs = []
# Use a slice to prevent IndexError from being raised, the following
# check will raise a more specific ValueError if the string is empty
nextchar = s[end:end + 1]
# Normally we expect nextchar == '"'
if nextchar != '"':
if nextchar in _ws:
end = _w(s, end).end()
nextchar = s[end:end + 1]
# Trivial empty object
if nextchar == '}':
if object_pairs_hook is not None:
result = object_pairs_hook(pairs)
return result, end
pairs = {}
if object_hook is not None:
pairs = object_hook(pairs)
return pairs, end + 1
elif nextchar != '"':
raise JSONDecodeError("Expecting property name", s, end)
end += 1
while True:
key, end = scanstring(s, end, encoding, strict)
key = memo_get(key, key)
# To skip some function call overhead we optimize the fast paths where
# the JSON key separator is ": " or just ":".
if s[end:end + 1] != ':':
end = _w(s, end).end()
if s[end:end + 1] != ':':
raise JSONDecodeError("Expecting : delimiter", s, end)
end += 1
try:
if s[end] in _ws:
end += 1
if s[end] in _ws:
end = _w(s, end + 1).end()
except IndexError:
pass
try:
value, end = scan_once(s, end)
except StopIteration:
raise JSONDecodeError("Expecting object", s, end)
pairs.append((key, value))
try:
nextchar = s[end]
if nextchar in _ws:
end = _w(s, end + 1).end()
nextchar = s[end]
except IndexError:
nextchar = ''
end += 1
if nextchar == '}':
break
elif nextchar != ',':
raise JSONDecodeError("Expecting , delimiter", s, end - 1)
try:
nextchar = s[end]
if nextchar in _ws:
end += 1
nextchar = s[end]
if nextchar in _ws:
end = _w(s, end + 1).end()
nextchar = s[end]
except IndexError:
nextchar = ''
end += 1
if nextchar != '"':
raise JSONDecodeError("Expecting property name", s, end - 1)
if object_pairs_hook is not None:
result = object_pairs_hook(pairs)
return result, end
pairs = dict(pairs)
if object_hook is not None:
pairs = object_hook(pairs)
return pairs, end
def JSONArray((s, end), scan_once, _w=WHITESPACE.match, _ws=WHITESPACE_STR):
values = []
nextchar = s[end:end + 1]
if nextchar in _ws:
end = _w(s, end + 1).end()
nextchar = s[end:end + 1]
# Look-ahead for trivial empty array
if nextchar == ']':
return values, end + 1
_append = values.append
while True:
try:
value, end = scan_once(s, end)
except StopIteration:
raise JSONDecodeError("Expecting object", s, end)
_append(value)
nextchar = s[end:end + 1]
if nextchar in _ws:
end = _w(s, end + 1).end()
nextchar = s[end:end + 1]
end += 1
if nextchar == ']':
break
elif nextchar != ',':
raise JSONDecodeError("Expecting , delimiter", s, end)
try:
if s[end] in _ws:
end += 1
if s[end] in _ws:
end = _w(s, end + 1).end()
except IndexError:
pass
return values, end
class JSONDecoder(object):
"""Simple JSON <http://json.org> decoder
Performs the following translations in decoding by default:
+---------------+-------------------+
| JSON | Python |
+===============+===================+
| object | dict |
+---------------+-------------------+
| array | list |
+---------------+-------------------+
| string | unicode |
+---------------+-------------------+
| number (int) | int, long |
+---------------+-------------------+
| number (real) | float |
+---------------+-------------------+
| true | True |
+---------------+-------------------+
| false | False |
+---------------+-------------------+
| null | None |
+---------------+-------------------+
It also understands ``NaN``, ``Infinity``, and ``-Infinity`` as
their corresponding ``float`` values, which is outside the JSON spec.
"""
def __init__(self, encoding=None, object_hook=None, parse_float=None,
parse_int=None, parse_constant=None, strict=True,
object_pairs_hook=None):
"""
*encoding* determines the encoding used to interpret any
:class:`str` objects decoded by this instance (``'utf-8'`` by
default). It has no effect when decoding :class:`unicode` objects.
Note that currently only encodings that are a superset of ASCII work,
strings of other encodings should be passed in as :class:`unicode`.
*object_hook*, if specified, will be called with the result of every
JSON object decoded and its return value will be used in place of the
given :class:`dict`. This can be used to provide custom
deserializations (e.g. to support JSON-RPC class hinting).
*object_pairs_hook* is an optional function that will be called with
the result of any object literal decode with an ordered list of pairs.
The return value of *object_pairs_hook* will be used instead of the
:class:`dict`. This feature can be used to implement custom decoders
that rely on the order that the key and value pairs are decoded (for
example, :func:`collections.OrderedDict` will remember the order of
insertion). If *object_hook* is also defined, the *object_pairs_hook*
takes priority.
*parse_float*, if specified, will be called with the string of every
JSON float to be decoded. By default, this is equivalent to
``float(num_str)``. This can be used to use another datatype or parser
for JSON floats (e.g. :class:`decimal.Decimal`).
*parse_int*, if specified, will be called with the string of every
JSON int to be decoded. By default, this is equivalent to
``int(num_str)``. This can be used to use another datatype or parser
for JSON integers (e.g. :class:`float`).
*parse_constant*, if specified, will be called with one of the
following strings: ``'-Infinity'``, ``'Infinity'``, ``'NaN'``. This
can be used to raise an exception if invalid JSON numbers are
encountered.
*strict* controls the parser's behavior when it encounters an
invalid control character in a string. The default setting of
``True`` means that unescaped control characters are parse errors, if
``False`` then control characters will be allowed in strings.
"""
self.encoding = encoding
self.object_hook = object_hook
self.object_pairs_hook = object_pairs_hook
self.parse_float = parse_float or float
self.parse_int = parse_int or int
self.parse_constant = parse_constant or _CONSTANTS.__getitem__
self.strict = strict
self.parse_object = JSONObject
self.parse_array = JSONArray
self.parse_string = scanstring
self.memo = {}
self.scan_once = make_scanner(self)
def decode(self, s, _w=WHITESPACE.match):
"""Return the Python representation of ``s`` (a ``str`` or ``unicode``
instance containing a JSON document)
"""
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
end = _w(s, end).end()
if end != len(s):
raise JSONDecodeError("Extra data", s, end, len(s))
return obj
def raw_decode(self, s, idx=0):
"""Decode a JSON document from ``s`` (a ``str`` or ``unicode``
beginning with a JSON document) and return a 2-tuple of the Python
representation and the index in ``s`` where the document ended.
This can be used to decode a JSON document from a string that may
have extraneous data at the end.
"""
try:
obj, end = self.scan_once(s, idx)
except StopIteration:
raise JSONDecodeError("No JSON object could be decoded", s, idx)
return obj, end